![]() ![]() Use the guides on your machine for help or refer to your instruction manual. For top loading bobbins the thread needs to be going around the bobbin in an anti-clockwise direction. Set your bobbin correctly into the machine. Follow the guide on your machine or the instructions in your manual. When winding thread onto your bobbin the thread needs to go right underneath the tension disc on the top of the machine. Make sure the thread is wound onto your bobbin evenly. Metal bobbins must NEVER be used with a Brother sewing machine equipped with a Top loading or Quick Set bobbin system. ![]() Using 3rd party bobbins may result in poor stitch quality or even damage your machine. Check your machine manual for the correct size. All modern top loading Brother sewing machines will use an 11.5 mm bobbin (SFB), while some older models will use a 9.2mm bobbin (TLB). It's important to use only original Brother Bobbins of the correct size for your machine. Your brother sewing machine is made to use a bobbin specifically designed to give the best stitching results. Using thread that does not pull through smoothly can cause thread breakages, poor stitching or damage to your machine. The thread should pull through the machine with no tightness. Thread your machine with the foot raised.To check if your thread is suitable for use on a sewing machine.For best results use a good quality branded thread. It's common for inexpensive low-quality threads or threads designed for hand sewing to be the cause of what appears to be tension problems when there is nothing wrong with the machine. Re-thread the top thread ensuring the threading line indicator on the hand wheel is positioned to the top (this puts the thread take up lever at the correct position for threading.).Check the tension settings, if the setting is too low reset the tension to setting number 4.Check the position of your bobbin case and reset as per instruction manual.(Threading your machine with the foot down will result in no tension being applied to the top thread because the tension discs are closed.) Re-thread the top thread, with your presser foot raised.Re-thread the top thread ensuring the threading line indicator on the hand wheel is positioned to the top (this puts the thread take up lever in the correct position for threading.) Missing the take up lever will cause thread to gather under the material.There are many causes for this but fortunately some simple steps can help solve this problem. Some Computerized machines will remind you to do this.ΔΆ. Thread bunching or "Bird nesting " of thread under the fabric. If you have a mechanical machine, check that the foot is lowered before sewing. ![]() Use the guides on your machine or refer to your instruction manual.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |